Printer
Friendly

Replacement Parts

Halyard/Rope

All rope furnished with all Duo-Safety Ladders as standard continues to be pure manila rope. The factory still uses manila rope because it still offers the least expensive and best combination of desirable features available in rope today:

• Soft - not stiff
• Abrasive - does not slip in gloves
• Will not stretch with heat exposure
• Has a minimum yield of at least 825 lbs. (No ladder requires more than 75 lbs. to raise)
• Readily available for replacement in any local hardware store

However, halyard replacement can be any rope material you choose - as long as NFPA-1931/1932 is followed.

We have rope available in two sizes: 3/8" and 1/2", our pulleys can accommodate both sizes. Our standard rope size is 3/8" on most ladder models. All Extension ladders 40ft and over are equipped with 1/2" manila rope as standard.

See our Price List for current pricing.

Replacement Rope Lengths
Solid Side	Truss	Fiberglass
16' 1000A - 22 ft	16' 500C - 22 ft	16' YGE-2 - 22 ft
20' 900A - 26 ft	20' 500C - 26 ft	20' YGE-2 - 26 ft
24' 900A - 30 ft	24' 500C - 30 ft	24' YGE-2 - 30 ft
22' 925A - 30 ft	28' 500C - 35 ft	28' YGE-2 - 35 ft
26' 925A - 36 ft	30' 500C - 72 ft	30' YGE-2 - 72 ft
28' 1200A - 35 ft	35' 500C - 82 ft	35' YGE-2 - 82 ft
30' 1200A - 54 ft	28' 525C - 52 ft	28' YGE-3 - 62 ft
35' 1200A - 62 ft	30' 525C - 56 ft	30' YGE-3 - 65 ft
28' 1225A - 38 ft	35' 525C - 60 ft	35' YGE-3 - 75 ft
30' 1225A - 42 ft	40' 500C - 95 ft
35' 1225A - 47 ft	45' 500C - 104 ft
40' 1500A - 94 ft	40' 525C - 87 ft
45' 1500A - 104 ft	45' 525C - 97 ft
40' 1525A - 87 ft	50' 500C - 114 ft
45' 1525A - 97 ft	50' 525C - 105 ft
Model 912-86 - 17 ft
Model 912-100 - 20 ft

Rope Parts

Rope Clip

Part# RC-1
Includes nut & bolt

Rope Thimble

Part# RT-1
must specify 3/8" or 1/2"

Hog Ring

Part# Hog Ring

Rope Assembled

Safety Note

All ground ladders shall be service tested per NFPA-1932(current edition), before being put into service for the first time, at least annually, anytime it is suspected as unsafe, subjected to impact, overloading, exposed to direct flame, when a heat label turns dark and always after being repaired unless that repair is only changing out rope/halyard.